High-tech heat exchangers from Nexson Group SAS

About Nexson Group SAS
30 years of experience in design and manufacturing of welded heat exchangers, pressure vessels and filters Nexson Group SAS covers a large range of processes and applications such as Refinery, Oil & Gas, Petrochemicals, Coke Oven, Gas & Steel.

Product of Nexson Group SAS
Spiral heat exchanger GreenSpiral™

ENERGY SAVING
The spiral design and optimization of conditions in both channels of the Nexson spiral heat exchangers provide a high heat transfer value (K value) which leads to big savings in energy costs.
LOW MAINTENANCE COST
Nexson spiral heat exchangers are designed to maximize heat transfer surface. They can be set up vertically or horizontally with no need for complex installation. In addition maintenance costs are very limited.
COMPACT SIZE AND ROBUSTNESS
Regarding the liquid to liquid duty, one Nexson spiral heat exchanger can replace 3 traditional Shell & tubes products, releasing footprint for the process part.
SELF CLEANING EFFECT
Thanks to the single channel configuration, a turbulent flow is created to handle tough medias. Since it is a single channel heat exchanger, if there is any cross section reduction inside the channel, flow velocity will increase flushing out the deposit.
NO DEAD ZONES IN THE CHANNELS
Thanks to its defined cross section uniform from the beginning to the end of the spiral core combined with turbulent flow, the spiral heat exchanger technology is considered as a no dead zone heat exchanger in the channel flow.

Self cleaning

Welded plate heat exchanger GreenBox™
Remarkable efficiency, unique design and compactness

GreenBox is a fully welded heat exchanger, made of square corrugated plates welded together, forming the heart of the heat exchanger. There is no gasket between the plates; the waterproofness is done by a weld. Only the removable side panels have gaskets for external sealing.
The heart of the heat exchanger GreenBox is accessible for inspection or cleaning by simply removing the 4 side panels.
The patented soft corners design, (the heart / panels assembly of the GreenBox), makes this heat exchanger the most robust of its category and is the ideal solution for operation in tough process duties with high pressures and temperatures.
Greenbox is a concentrate of thermal efficiency as heat recovery interchanger, condenser, reboiler or evaporator, and can be used in fouling duties.
High turbulent flow induced by the corrugated plates of GreenBox makes it about 5 times more thermally efficient than a traditional shell & tube heat exchanger. It also allows a temperature approach of 2°C.
A better heat transfer coefficient means also compact size of Greenbox and this can also reduce significantly installation, operation and maintenance costs.
Ingenious corner’s design brings mechanical reliability to the GreenBox heat exchanger.
The GreenBox works in simple or multi-pass and, if needed, the access to the plates for inspections and cleaning is given by simply removing the side panels.
GreenBox Welded Heat Exchangers can be manufactured in any material that can be formed and welded such as 304 / 304L, 316 / 316L, 904L, 254 SMO, C276, C22, C2000, Titanium…
Nexson GreenBox is used for a design pressure from full vacuum to 50 barg, from -50°C design temperature to 450°C.

SITE: http://nexson-group.ru/